GEN 310 Overview
GEN 310 is most often used to weld base metals of similar chemical composition in wrought or cast form. The
weld deposit is fully austenitic. Low heat input is recommended during welding.
Composición química de AWS (típica)
| %C | %Cr | %Ni | %Mo | %Mn |
|---|---|---|---|---|
| 0.08 – 0.15 | 25.0 – 28.0 | 20.0 – 22.5 | 0.75 max | 1.0 – 2.5 |
| 0.12 | 25.9 | 20.7 | 0.09 | 1,65 |
| %Si | %P | %S | %Cu |
|---|---|---|---|
| 0.30 – 0.65 | 0.03 max | 0.03 max | 0.75 max |
| 0.40 | 0.001 | 0.012 | 0.063 |
Propiedades mecánicas típicas del metal de soldadura
| Fuerza de Tensión | 87,000 psi | 600 MPa |
| Límite elástico | 57,000 psi | 393 MPa |
| Alargamiento | 42 % |
Typical Welding Parameters
| Proceso | Diameter | Voltage | Amperage | Gas/Flux |
|---|---|---|---|---|
| TIG (GTAW) | 1/16” | 14 – 17 | 80 – 125 | 100% Ar |
| 3/32” | 15 – 20 | 125 – 200 | 100% Ar | |
| MIG (GMAW) | .035” | 23 – 29 | 150 – 250 | 98%Ar – 2%O2 |
| .045” | 24 – 30 | 160 – 270 | 98%Ar – 2%O2 | |
| Sub Arc (SAW) | .093” | 28 – 32 | 250 – 450 | |
| .125” | 29 – 34 | 300 – 500 |