GEN 208 Overview
GEN 208 is used for TIG, MIG, and SAW welding of nickel 200 or 201. This filler metal is also employed for overlaying on steel as well as repairing cast iron castings. It can also be used for dissimilar joints between nickel or nickel alloys to stainless or ferritic steels. Additionally, GEN 208 is used for surfacing of steel.Â
ComposiciĂłn quĂmica de AWS (tĂpica)
| %C | %Mn | %Ni | %Cu | %Fe | %Al |
|---|---|---|---|---|---|
|
0.15 max. 0.04 |
1.0 max. 0.38 |
93.0 min. 95.50 |
0.25 max. 0.015 |
1.0 max. 0.18 |
1.50 max. 0.10 |
| %Si | %P | %S | %Ti | Total Otros |
|---|---|---|---|---|
|
0.75 max. 0.57 |
0.03 max. 0.003 |
0.015 max. 0.003 |
2.0 â 3.5 2.95 |
0.50 max. |
Propiedades mecĂĄnicas tĂpicas del metal de soldadura
| Fuerza de TensiĂłn | 65,000 psi | 448 MPa |
| LĂmite elĂĄstico | 36,000 psi | 248 MPa |
| Alargamiento | 28% |
Typical Welding Parameters
| Proceso | Diameter | Voltage | Amperage | Gas/Flux |
|---|---|---|---|---|
| TIG (GTAW) | 1/16â (1.6 mm) | 14 â 18 | 90 â 130 | 100% Ar |
| 3/32â (2.4 mm) | 15 â 20 | 120 â 175 | 100% Ar | |
| 1/8â (3.2 mm) | 15 â 20 | 150 â 220 | 100% Ar | |
| MIG (GMAW) | .035â (0.9 mm) | 26 â 30 | 150 â 200 | 75% Ar â 25% He |
| .045â (1.1 mm) | 28 â 32 | 170 â 220 | 75% Ar â 25% He | |
| Sub Arc (SAW) | .093â (2.4 mm) | 28 â 31 | 275 â 350 | |
| .125â (3.2 mm) | 29 â 32 | 350 â 450 |