GEN 430 Overview
GEN 430 is a ferritic stainless steel filler metal offering good ductility in heat‐treated condition. It is generally used to weld similar alloys but can also be used for overlays and thermal spraying. Pre‐heating and post weld heat treatment is required to obtain optimum mechanical properties and corrosion resistance.
AWS Chemical Composition (Typical)
| %C | %Cr | %Ni | %Mo | %Mn |
|---|---|---|---|---|
|
0.10 max 0.025 |
15.5 – 17.0 16.13 |
0.60 max 0.32 |
0.75 max 0.055 |
0.60 max 0.37 |
| %Si | %P | %S | %Cu |
|---|---|---|---|
|
0.50 max 0.28 |
0.03 max 0.023 |
0.03 max 0.004 |
0.75 max 0.23 |
Typical Weld Metal Mechanical Properties
| Tensile Strength | 77,500 psi | 534 MPa |
| Yield Strength | 59,000 psi | 407 MPa |
| Elongation | 25 % |
Typical Welding Parameters
| Process | Diameter | Voltage | Amperage | Gas/Flux |
|---|---|---|---|---|
| TIG (GTAW) | 1/16” (1.6 mm) | 14 – 17 | 90 – 130 | 100% Ar |
| 3/32” (2.4 mm) | 15 – 20 | 125 – 175 | 100% Ar | |
| MIG (GMAW) | .035” (0.9 mm) | 29 – 33 | 160 – 180 | 98%Ar – 2%O2 |
| .045” (1.1 mm) | 29 – 33 | 180 – 220 | 98%Ar – 2%O2 | |
| Sub Arc (SAW) | .093” (2.4 mm) | 28 – 33 | 250 – 450 | |
| .125” (3.2 mm) | 29 – 34 | 300 – 500 |